Request a quotation

Tell us about your motors.
We’ll size the solution.

Fill in the equipment information form with the values from your motor nameplates. Artesis uses it to prepare an accurate technical and commercial proposal, including sensor selection and installation scope.

Up to 20 motorsin a single request
Nameplate datais all you need to get started
Technical + commercialproposal prepared by Artesis
How it works

Three steps to your proposal.

The form takes the same information our engineers need to select sensors and plan the installation. Complete it online and send it to your Artesis contact in one go.

1

Customer & project

Tell us who you are, the project name and where the motors are installed, including the available network connection.

2

Motor list

For every motor, enter the nameplate data, supply cables, motor supply type and any CT and PT already installed in the feeder.

3

Your proposal

Artesis reviews your data and prepares an accurate technical and commercial proposal, including sensor selection and installation scope.

Request for quotation · Motor & measurement data

Equipment information form.

Fill in the customer and project information, then add every motor you would like us to quote. Fields marked with * are required.

Section 1 · Customer & projectSection 2 · Motor list (up to 20 motors)
Please enable JavaScript in your browser to complete this form.

1 Customer & project information

Site / MCC location and available network connection

2 Motor list (up to 20 motors)

Add one block per motor. Use the values printed on the motor nameplate.

Motor

Number of parallel cables carrying each phase
What the motor drives, operating pattern (continuous, intermittent, standby) and how critical it is.
PDF, JPG or PNG. Up to 5 files, 10 MB each.
Consent
What happens next

From your form to your proposal.

Step 1

We review your data

Our engineers check the motor list, supply type and existing CT and PT for each motor.

Step 2

We select the measurement

We choose the sensors and define the installation scope that fit your motors and feeders.

Step 3

You receive a proposal

An accurate technical and commercial proposal, prepared from the information you provided.

FAQ

Filling in the form.

Where do I find the nameplate data?

On the metal plate fixed to the motor frame: nominal voltage, nominal current and speed are printed there. A photo of the plate is enough to copy the values from.

What does “cables per phase” mean?

High-current motors are often supplied through several parallel cables per phase that share the current equally. Enter how many cables there are per phase and their cross-section in mm². Measuring one cable and multiplying by that number allows smaller and less expensive current sensors.

What if there is no CT or PT installed?

Choose “Not installed” for that transformer and leave the ratio and accuracy class empty.

Which motor supply types can I choose?

Direct-on-line (DoL), star / delta, soft starter or variable frequency drive (VFD or VSD). If yours is different, select “Other” and type it in.

What if I have more than 20 motors?

Submit the form again for the additional motors, using the same project name.

Prefer to talk first?

Speak with an Artesis engineer about your motors before you send the form.

Talk to Artesis

Contact Info

58 Thomas St, New York, 10013 USA

+1 443 315 2056

enquiry@artesis.com

Sitemap
Please enable JavaScript in your browser to complete this form.